Detailed Product Description Function The flattener is used to remove coil set at the head end of coils to facilitate strip feed into the line.  FeaturesFive hardened steel flattener rolls run in grease lubricated antifriction bearings and are supported in the main housing. The three...

Detailed Product Description Function The pay-off reel receives and holds the coils for feeding into the line. The payoff reel holds back the required tension on the strip. The payoff reel will be designed for over unwind operation. The mandrel will be supported by an outboard...

Detailed Product Description Structure:This production line is made up of the following parts: uncoiler, roll- up truck, crosscut shear, temper mill, front water jacket, furnace body without muffle, post water jacket, air cooling structure, tension roller, winder, coil stripping car, temperature...

Detailed Product Description Function The tension leveler in conjunction with the line bridles improves strip flatness by inducing a nominal permanent elongation in the material through a process of repeated bending around small diameter rolls under tension. FeaturesThe extension roll...

Detailed Product Description Function The overhung expanding drum type tension reels will be designed to wind the strip into a tight coil. FeatureThe mandrel will support the coil on the recoiler with the segments expanded tightly against the inside of the coil by means of a sleeve...

Detailed Product Description Feature and fuction: Skin pass mill is used for tempering the cold rolled steel coils in order to enhance strip flatness and to improve mechanical characteristic such as deep-drawing characteristic of the strip steel. A skin pass mill mainly...

Detailed Product Description Feature and Function: Skin pass mill is used for tempering the cold rolled steel coils in order to enhance strip flatness and to improve mechanical characteristic such as deep-drawing characteristic of the strip steel. A skin pass mill mainly...

Detailed Product Description Function The exit vertical accumulator will be provided to maintain process section speed during coil discharge operation.Features A vertical cable type exit accumulator will be provided. The total storage capacity will be adequate to accommodate coil...

Detailed Product Description  Function The payoff reel receives and holds the coils for feeding into the line. The payoff reel holds back the required tension on the strip. The payoff reel will be designed for over unwind operation. The mandrel will be supported by an outboard...

Detailed Product Description Function The flattener is used to remove coil set at the head end of coils to facilitate strip feed into the line.  FeaturesFive hardened steel flattener rolls run in grease lubricated antifriction bearings and are supported in the main housing. The three...